How to Hang and Remove Handy Hooks™

Learn how to install and remove Handy Hooks with step-by-step illustrations and video instructions using either our damage-free adhesive strips or the included hardware. Whether you’re mounting on drywall, tile, wood, metal, or concrete, Handy Hooks give you the freedom to hang items securely on any surface.

Mounting Method One

Damage-Free Adhesive

  • Step 1

    Clean and dry surface.

  • Step 2

    Remove adhesive front liner (with Wrap-It Storage logo) and stick strip to base.

  • Step 3

    Remove adhesive back liner (labeled "Wall"). Press hook onto wall for 30 seconds.

  • Step 4

    Slide hook up and off base. Press base for 30 seconds. This creates a strong bond.

  • Step 5

    Slide hook onto base. Wait at least 1 hour before hanging anything.

1 5

Tips for best adhesion go here***

Removal

  • Step 1

    Slide hook up and off base.

  • Step 2

    Gently hold base in place.

  • Step 3

    Pull the adhesive straight down. Do not pull toward you. Slowly stretch adhesive until it releases.

1 3

Mounting Method Two

Permanent Hardware

Option One: Into Wall Stud

  • Step 1

    Locate the wall stud.

  • Step 2

    Slide hook off base and position on wall. Mark the holes.

  • Step 3

    Install base with two screws, starting with the top hole.

  • Step 4

    Slide hook onto base. It's ready for use immediately!

1 4

Option Two: With Wall Anchors

  • Step 1

    Slide base off hook and position on wall. Mark the holes.

  • Step 2

    Drill pilot holes for wall anchors. Before drilling, verify the wall layout for any concealed utilities or structural components.

  • Step 3

    Plug holes with wall anchors provided. If needed, tap in using a hammer or mallet.

  • Step 4

    Install base with two screws, starting with the top hole.

  • Step 5

    Slide hook onto base. It's ready for use immediatley!

1 5